Gunsmithing

CS0324 - 1911 24/7/365 PROFESSIONAL 5 lb TRIGGER PULL SET

The 24/7....365 Professional 5lb. Trigger Pull Set is the most rugged, reliable, fire control set that has ever been designed for the 1911. The 24/7....365 will drop in your 1911 and give you that 5 lb. trigger pull demanded by those who’s lives depend on flawless, reliable preformance from their 1911 tactical pistols. The sear spring will need to be properly tensioned to give you the 5 lb. trigger pull in your pistol. Suitable for use in any 1911 pistol. Learn More

CS0212 - 1911 Tactical II Chamfered 4 lb. Trigger Pull (5 piece) Set

This set is specifically prepped and matched to give a 4 lb. trigger pull without any stoning of the sear or hammer. The sear spring will need to be properly tensioned for your specific pistol. Recommended for all applications. Suitable for use in any 1911 pistol. Learn More

CS0019 - 1911 TM Hammer Strut

The only hammer strut on the market that is correctly designed for all applications. This hammer strut has the correct shape to prevent the hammer strut from rubbing on the sear spring causing the unloading of the sear spring tension. The TM strut is also slightly longer to allow a stronger hammer impact to the firing pin. The TM strut will provide a stronger hammer strike and faster lock time due to more main spring compression. Some fitting may be required. Learn More

We're proud to introduce the Bob Marvel Compensator brought to you by Everglades Custom Guns. Bob Marvel is a pioneer in the 1911 field and this compensator is the culmination of years of research and development. In our opinion this compensator is the best on the market for 9mm Major and 38 Super. Unparalleled efficiency and feel with this comp.

Cone and bull barrel versions available. Cone style designed with a proprietary locking surface for optimal lock up. Bob Marvel's guns are known as some of the most accurate pistols in the world and the design of the bearing surface is essential to producing these amazing results.

CNC machined from pre-hardened steel to maintain tight tolerances. Learn More

We're proud to introduce our Everglades Custom Guns Horizontal C-More Scope Mount. Designed for the STI or SV 2011 platform. It brings the dot closer to the center line of the bore than a typical upright mount. CNC machined from 6061 aluminum and anodized for durability. Learn More

We're proud to introduce our Everglades Custom Guns STI 2011 trigger. This trigger has an overtravel screw, pre-travel tab and the shoe is swaged to the bow. The aluminum shoe is the long flat design that can be contoured to any shape that you prefer. If the interest is there we will offer them in different shoe configurations. The aluminum shoe is both taller and wider than the plastic versions to allow precise fitting to your individual grip.

The bow is stainless and is designed for a better fit in the STI grip. The fitting tabs in the rear are also oversized to allow all of the up and down movement to be eliminated at the rear of the trigger. Grip not included with trigger. Learn More

4 different size sanding sticks for general Gunsmith use. View them in our video below. Learn More

4 different size sanding sticks for general Gunsmith use. Included are 4 rolls of sandpaper with pressure sensitive adhesive backing. Each roll is 4.5" x 33'. One roll of each 220, 320, 400 and 600 grit.

View them in our video below. Learn More

CS0085 - 1911 Tactical Match 4.5 lb Trigger Pull 5 pc Set

This set is specifically prepped and matched to give a 4.5 lb trigger pull with out any stoning of the sear or hammer. The sear spring may need to be properly tensioned for your specific pistol. Recommended for all applications. Learn More