300 AAC Blackout Brass

Customer Reviews (54)

Awesome Quality Review by PapaBear84

Overall Rating

Even though USPS lost the first shipment Everglades was quick to replace the shipment. And the quality of the brass is awesome. I also love the fact that it is ready to prime and load. I will be buying more in the future. (Posted on 7/15/2019)

Update review Review by David

Overall Rating

So I've loaded this brass and have fired many rounds of it. Its a quality product at a great price. (Posted on 4/26/2019)

Awesome StuffReview by BowRider

Overall Rating

Received 1000 pieces of brass yesterday, delayed a couple days due to flooding in my area. Had purchased from another site before so was a little skeptical. Can't believe it, brass looks factory new. Will be a repeat customer. (Posted on 3/17/2019)

Best 300 AAC brass Review by Beowulf

Overall Rating

This brass is so good it looks better than most new brass. Ordered 500 and all but 3 are good and I got 21 extra. Almost all are LC with many being match brass. I did have 61 that had been shot thru a SAW and so I'll use those for sub sonic loads. I did find some primer pockets that were too tight but that number has been small so far. Great brass great price and good shipping time.
(Posted on 3/16/2019)

Good buyReview by Dave

Overall Rating

Bought a 100 bag at 1st just to check it out. Im a experienced reloader. Haven't loaded any up yet but inspected the brass and it looks good. I'm going to buy more right now. This stuff looks good to go (Posted on 3/13/2019)

Good stuff.Review by Brian

Overall Rating

Fast no hassle shipping. Good merchandise. Will be trading with these folks in the future. (Posted on 2/21/2019)

300 blk convertedReview by Tab

Overall Rating

Top notch brass, great people to deal with, can't ask for anything else. (Posted on 9/13/2018)

Fast response & action to correct my mistakeReview by TC

Overall Rating

I accidentally ordered the wrong caliber of brass. I emailed customer service the day it was shipping and they were able to stop the shipment and get my mistake corrected and shipped the correct brass. Thanks Dave! I will update on the brass itself once I receive it. (Posted on 5/15/2018)

Great brass priced rightReview by Tomcat

Overall Rating

Ordered 3500 pieces to split between myself and a friend. After counting it out didn't find a unusable piece out of all of it, and had about 60 extra pieces. Spot checking 100 pieces for length all checked where + or - .001. All most all 3500 pieces where LC brass ranging from 08 to 16 nice and clean inside and out. For the price not worth my to cut and form myself. Keep up the great work will be back again.

(Posted on 3/31/2018)

Good Brass. No additional work neededReview by AFJuvat

Overall Rating

Bought a bag to try. I've loaded 100 pieces so far. The brass is clean and required no additional work before I started loading. (Posted on 2/17/2018)

Customer serviceReview by Casey

Overall Rating

I had an issue with some of the 300 AAC brass. I emailed Steve and once again he was quick to respond. after we got the issue resolved Steve made it right with me. I can say from dealings with other companies customer service that Everglades has the best customer service. Steve is great. This is why I order brass from Everglades and not other companies. (Posted on 11/6/2017)

Gotta have some More!Review by Tony

Overall Rating

I bought 1500rds of the 300BLK and found 2 cases that was unusable. I received 15-20 extra pieces so 2 unusable cases was not a problem. Great product Everglades. I have 1000 loaded and I have been using 500 to reload and test.Not a single issue with the one I have fired. You will be getting another order from me for this product. Some primer pockets were snug but I had no real problems priming the cases with a RCBS hand primer. (Posted on 10/3/2017)

Great Brass!Review by John

Overall Rating

Ordered 500 300Blk cases and got them quickly. Had a few with bent necks, probably from shipping, but easily fixed with resizing die. Lengths were uniform, brass was clean. Put about 100 through a case gauge and every one was perfect. Swagged primer pockets were a little rough, but they all took primers ok. Would definitely buy them again. It has been a pleasure working with Everglades Ammo. (Posted on 8/28/2017)

Great BrassReview by D Pearl

Overall Rating

I ordered 500 cases to see use for range ammo. All the cases look good and I received my order within 2 days of placing the order. Customer Service and shipping was fast. I received the brass and inspected it. The cases looked at good as new brass. I run 10 cases thru my dillion reloader and had no problems with primers or seating. I shot all 10 rounds and the functioned as if it was factory ammo. I will be ordering more and saving money for the Barnes bullets. (Posted on 8/9/2017)

Excellent product Review by Siskababa

Overall Rating

After pricing out a case trimmer and other items to convert all my .223 brass and then finding Everglades ready to load cases, what a deal. It would take me a very, very long to recoup the investment on the equipment, let alone my time involved, it seemed like a no brainer. I've loaded 500 cases without a single hiccup and now I'm ready to load them over again. I'm loading only sub-sonic at this time and all the cases are still exactly the original tolerances so I'm hoping to get a lot of use out of this batch.
Thanks guys for a great product and saving me a boat load of time. (Posted on 8/7/2017)

ExcellentReview by Clark

Overall Rating

Dirty primer pockets and internals primer pockets not swaged some mouths are smached box didn't really look square anymore no holes in box cases not in bag ordered 1000 rounds most I looked at were FC dated head stamps (Posted on 7/4/2017)

300 blk convertedReview by Bernie

Overall Rating

Top quality will be buying a lot more. Thanks guys (Posted on 5/10/2017)

Great brass!Review by JT

Overall Rating

Received 517 pieces, only had to reject two. Need to resize about 9-10 due to excessive dings. All LC headstamp, and the mouths held up much better than the new gemtech brass during shipping. Hardly any out of round. The brass does seem pretty oily, which would explain a lot of the denting on ~10%. Threw a batch of 100 in my ultrasonic cleaner and they cleaned up nice. Will definitely keep doing business with Everglades! (Posted on 2/7/2017)

fast shipping , good stuff . I will buy again .Review by flyxpl

Overall Rating

Great stuff . Maybe three out of 100 needed light chamfering to get primer in , but that is better then loose primers . A few out of round case mouths , but nothing a boat tail bullet wouldn't straighten out on way in . (Posted on 2/6/2017)

SatisfiedReview by Fishman

Overall Rating

Only 3/500 cases were unusable, however many were either not swaged or not swaged well enough. The first one I primed made a distinctive crunch going in. About 10% felt like they still has crimped primer pockets when I swaged them. Luckily I have a case swager but it was an inconvenience. (Posted on 11/4/2016)