I am about 1500 rounds in to a 4000 round case. The bullets run .354 on both my mics (with one at .325 just fell in the case). I spent several hours on the 1st two to three hundred rounds just trying to figure out how to load them without being able to push the bullet in by hand. Actually I could push the bullet in with the micrometer while measuring the oal. I went as far as totally eliminating the flare die and using a Lee Factory crimp die 1 quarter turn past maximum under the instructions (which but the Press under undue pressure and made powder jump out of the cases from the press binding up) and I could still set the bullet at the desired oal from Simply moving my thumb on the thumb wheel of the micrometer. Obviously this resulted in a phone call the next day to Everglades. They said a lee under size die would take care of the problem in which I ordered from Amazon for $30, or they would happily take the remaining rounds unloaded back and refund the money for them. This did fix the problem however I do find it necessary now to lube the cases. I have purchased other bullets from them in the past and had good luck with them, unfortunately i feel like there has been unnecessary difficulty with these. I also feel like it would be a good idea to mention needing the undersize die in the description since that seems to be a necessity. However, now that all the links are worked through, they shoot fine and will hold tight in the case. I will also reiterate they were more than willing to accept the projectiles back for return.

I gave these bullets a try with a little suspicion. Too good to be true? They are good bullets but I found the ogive varies a bit. The diameter is .354” which is on the small side but still in specs. On their advice, I tried a Lee undersize carbide sizing die which allowed a good crimp and bullet pull with any brass. They shoot well and are a good value for high round count days! For my competitions I’ll stay with the .355” & .356” bullets they offer from Zero but these will get as much use in pistols and smgs as I can!

These bullets do run a little under size about .3545" but I have found them to be very accurate. I've loaded and shot many thousands of these in my CZ pistols and have found using a very small amount of case flare works best. Even when loading mixed brass I've not seen any bullet set back and my OAL stays at + or - .003" .

Just received second order of 4,000 FMJ recessed bullets. Ordered Wed. evening and received the Friday after noon. Double boxed and in great shape when they got here. Didn't take them out and count every one, but opened and spot checked about 100/150
and they were within .3 to .5 grains, not bad at all. The box was 68 lbs so the count had to almost spot on. I have already loaded on shot 4,000 of these bullets and they are great that plus the price makes me happy. Will order more and more from this company. Love the service so far.

Ordered 4k of these, best deal on projectiles online now. Loaded them all in a week and took them out. The shot super well, affordable quality training ammunition

I have ordered 1500 of these and as long as they sell them I will keep buying them.

Order 500 should be ordering more soon. Nice to load and shoot very well.

Ordered on April 1st and had them in hand on April 5th.

Pulled a handful out and generally checked them out. All of them weighed out beautifully. Then, I loaded 20 and took them out to the range. They felt really great and I got nice tight groups out of them.

I am pleased with both the service and the product. I look forward to a big day of loading followed by a big day of shooting. Keep up the great work!

Have loaded a little over 1500 so far and have shot approximately 500 for the price and consistency i will keep buying. plus they work great in my Mr bullet feeder!

Excellent value, Accurate weight and quality to match with free shipping!
This is my go to place for bullets.